When you are getting the error such as Heating Failed or Thermal Runaway, you might be scratching your head and think why the printer is so poor and not able to finish the print. But reality, the printer is actually protecting you from resulting in fires in some cases, which is called Thermal Runaway Protection. […]
As a LD-002R user, have you ever getting tired of changing the screen every 200 hours? Here’s the step by step guide to convert your LD-002R into LD-002H. LD-002H Mono Screen Lifespan is at 2000 hours which is 10 times of the LD-002R RBG Screen, make your life easier & better. Since LD-002R Screen size […]
Gotten a screen from BIGTREETECH but realized it wasn’t really compatible with the SKR Mini E3 V3? We are in the same position! As SKR Mini E3 V3 does not have EXP3 port and BTT Mini 12864 only have EXP1 & EXP2, both screen is not really directly compatible. However thanks to radek8, we managed […]
Anycubic Vyper & Kobra Max are having the same hotend, so the leveling gauge are the at the same position. Auto leveling sensor abnormal, please check it and wiring! You can try to refer to my steps, start the printer without heating, touch the nozzle with a tool If the LED light inside the print […]
![The best ender 3 s1 upgrades & mods [updated 2022]](https://www.smith3d.com/wp-content/uploads/2022/06/Screenshot-2022-06-27-215106-1088x800.png)
The Ender 3 S1 is the Creality’s latest edition of their version popular Ender 3 3D Printer. After the successful launch of Ender 3 & Ender 3 V2 Printer, Ender 3 S1 is here to improve the TPU printing & ease to use. Although Ender 3 S1 is a little under double the price, and packed […]
The Ender 3 is one of the best budget 3D printers, especially for hobbyists. And because of the low cost, many some of the important part wasn’t included inside the package. In this article, we’ll be take a look at a popular upgrade for budget 3D Printer that stability to the X-axis gantry by using […]
Problem #1 – Clogging, Stringing or Signs of Under/Over Extruder Examples of this problem can be seen in the pictures below: Recommended Solutions Increase the nozzle temperature to 230°C, lower down the print speed to 40mm/s, reduce the first layer height to 0.1mm to see if it can be printed without any issue. If issue […]
Instructions to use ender 3 V2 stock LCD with SKR mini E3 V2/V3 or even E3 Turbo. Since Ender 3 V2 & Ender 3 S1 are using the same knob LCD screen, they have slight different pin out compared with the LCD12864 or BTT TFT Screen. SKR Mini E3 V2/V3 are viable drop-in replacements for […]
This guide is all about Getting Started with Ender 3 S1, the newest family for Ender series in 2022. Packed with new “Sprite” direct dual-gear extrusion system, removable flexible PC spring steel print bed, an auto leveling CR Touch and some other improvements. Installation & Assembly This has to be one of the easiest printer […]
https://www.thingiverse.com/thing:5043269