Update Ender 5 Plus Latest Firmware to Insanity Automation DWIN 7.4

Ender 5 Plus has be released for aged and it has been one of the most stable printer being released by Creality. However the firmware itself has been lackluster and stay at 1.70.2~1.70.3 since years ago. Printer in 2023 should have equips with more features. Therefore Insanity Automation has released a better firmware equip with […]

Ender 3 Max Neo vs Ender 3 Max – The Full-Scale Upgrade Version of Ender-3 Max

Creality officially announces today the debut of the Ender-3 Neo series and HALOT-RAY resin printer. alongside other accessories in the Creality Summer Upgrade event. In this article we will be focusing on Ender 3 Max Neo instead. Model Ender 3 v2 Neo Ender 3 Max Ender 3 Max Neo Print Volume 220 x 220 x […]

How to solve Heating Failed: E1 Printer Halted , Thermal Runaway: E1 Printer Halted

When you are getting the error such as Heating Failed or Thermal Runaway, you might be scratching your head and think why the printer is so poor and not able to finish the print. But reality, the printer is actually protecting you from resulting in fires in some cases, which is called Thermal Runaway Protection. […]

Convert Creality LD-002R RBG to Mono Screen using LD-002H Mono LCD Step By Step Guide

As a LD-002R user, have you ever getting tired of changing the screen every 200 hours? Here’s the step by step guide to convert your LD-002R into LD-002H. LD-002H Mono Screen Lifespan is at 2000 hours which is 10 times of the LD-002R RBG Screen, make your life easier & better. Since LD-002R Screen size […]

Dual Z-axis Upgrade with Belt for Ender 3 Series / Ender 3 Max / CR10S Pro Series

The Ender 3 is one of the best budget 3D printers, especially for hobbyists. And because of the low cost, many some of the important part wasn’t included inside the package. In this article, we’ll be take a look at a popular upgrade for budget 3D Printer that stability to the X-axis gantry by using […]

eSUN Matte PLA Printing Problems & Solutions

Problem #1 – Clogging, Stringing or Signs of Under/Over Extruder Examples of this problem can be seen in the pictures below: Recommended Solutions Increase the nozzle temperature to 230°C, lower down the print speed to 40mm/s, reduce the first layer height to 0.1mm to see if it can be printed without any issue. If issue […]

This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.