Snapmaker U1 multi-material Core XY FDM 3D printer

Snapmaker U1 Multi-Material Core XY 3D Printer

Snapmaker U1 3D printer: smart tool swapping, reduces filament waste, saves money.

Snapmaker U1 Multi Material Core XY 3D Printer (FDM)

Snapmaker U1 CoreXY 3D printer with 500mm/s speed

Snapmaker U1 3D printer with smart calibration for smooth prints

Snapmaker U1 3D printer with automatic filament management and RFID detection.

Snapmaker U1 3D printer with anomaly detection features.

Snapmaker U1 3D printer specs table with printing, filament, electronics details.

[PRE ORDER] Snapmaker U1 Multi Material Core XY 3D Printer

Price range: RM4,299.00 through RM4,449.00

Key Features

SnapSwap™ System: With 4 toolheads preloaded and pre-heated materials, U1 cuts waiting time to 5 seconds by swapping toolheads, and eliminates remaining material squeezing out for filament changes, enabling 5X more speed and 5X less waste.
Multiple Colors and Materials: 4 individual extruders enable printing creations with multi-color, multi-material filaments, unleashing your creativity.
Smart Calibration: Dynamic flow calibration, vibration compensation, fine-tuned extrusion, and flawless first layer.
CoreXY System with 500mm/s Speed: Lightweight, rigid carbon fiber X-axis rails deliver travel speeds of up to 500mm/s while maintaining long-term precision across a 270 × 270 × 270mm work area.
Ease of Use: Automatic filament system, AI-powered print monitoring, and smart control via a 3.5-inch touchscreen, app remote control, and Snapmaker Orca software.

Variation

Clear

Order Info

Order will be shipped out from our KL warehouse in 1-3 business days once being processed.
If you need Lalamove once purchased, WhatsApp to our phone for quick arrange delivery.

Accepted Payment Methods - Visa, Mastercard, American Express, PayPal, FPX, Atome

SKU: SNAPMAKER-U1 Categories: 3D Printers, FDM 3D Printers, Industrial Printer Tag: 496

Snapmaker U1 Overview

Four Toolheads. Five-Second Swaps. Industrial-Grade Speed with Minimal Waste.

SnapSwap™ Multi-Toolhead
Swap System

Fine-Tuned
Extrusion Rate

Efficient Multi-Colour
(Minimal Purge)

Switch Filaments in 5 Seconds with SnapSwap™

The SnapSwap™ system lets the U1 switch by simply swapping the toolheads, cutting your wait time from approximately two minutes to only five seconds.

SnapSwap™ Low-Waste Multi-Material Printing

Make More, Waste Less

Reduces waste dramatically by avoiding traditional purge towers.
Save up to 80% of filament and hundreds per year in material costs.
Perfect for eco-conscious creators and small production environments.

Built for Excellence

CoreXY System with 500mm/s Speed

The U1 is built on a CoreXY motion system with lightweight, rigid carbon fiber X-axis rails, delivering speeds of up to 500mm/s and maintaining long-term precision across a 270 × 270 × 270mm work area.

Evolving Multi Colour Prints

No More Purging for Color Change

Filament-changing printers “purge” by wasting perfectly good filament—pushing one color through the nozzle until the last trace of the old one is gone. The U1 doesn’t play that game. It only purges the tiny amount of filament that’s actually degraded by the time a new print job begins, or during flow-rate calibration, cutting waste by up to 80% on every print.

Firm Connectivity

Rock-Solid & Precise Locks

The U1 uses steel-ball kinematic couplings to click each print heat into perfect position, then locks it securely—no screws, no magnets, no extra motors. Locked fast, rock solid, tested over 1,000,000 swaps with zero failures.

Save More Filament, Save More Money

Less Waste Means Serious Savings

So. Much. Waste. On other 3D printers, printing a multi-color model leaves behind a mountain of garbage—often wasting 3 or 4 times more material than what ends up in the actual model! U1 avoids the waste with smart tool swapping, saving filament, saving money, and even saving the environment.

Toolhead Offset Calibration

Smooth Print Starts with Smart Calibration

With four toolheads working at high speed, precision isn’t optional—it’s built in. The U1’s compensation algorithms lock every toolhead in sync, dampen vibrations, dial in extrusion, and level out the build surface, so you get the smooth, dimensionally accurate results you’d expect from a top-tier single-head printer.

High Speed while maintaining Quality

Vibration Compensation for Consistent Prints

Input Shaping, aided by a precision accelerometer sensor, reduces vibrations caused by rapid directional changes by pre-processing movement commands to cancel out resonant frequencies. By adjusting acceleration profiles and introducing calculated delays, it prevents surface artifacts like ghosting or ripples, allowing the U1 to deliver clean edges, smooth walls, and sharp details even at high speeds.

Auto Preassure Advance

Fine-tuned Extrusion for Exquisite Details

The U1 uses Pressure Advance to stay ahead of flow delays, especially during quick moves or sharp corners. It tweaks extrusion timing based on motion changes, so filament flows smoothly even when speeds shift. That means fewer blobs, less thinning, and crisp, consistent detail.

Convenient Functionality

Effortless Filament Management

The U1 comes equipped with a super-compact automatic filament system that holds up to four spools on standby. It handles everything from filament detection and loading, so you can print in vivid color, hassle-free.

Auto-Loading

No more threading, fiddling, or guesswork. Just hang your filament and let it roll.

Auto-Loading

Backup Mode

RFID
Recognition

Versatile Accesibility

Manage Your Prints with Ease

Snapmaker Orca builds on Orca Slicer’s powerful engine and adds engineer-tested profiles for official materials and machine models. Paired with the Snapmaker App, you can start, monitor, and control your prints from anywhere—and even capture time-lapses videos to replay your creation in motion. Easy print management is right at your fingertips.

Convenient Functionality

Anomaly Detection and Alert

With a mix of over a dozen sensors and precision mechanics, the U1 automatically spots issues and guides you through quick fixes, ensuring smooth, successful prints every time.

Supervised Prints

Capture the Highlights, Skip the Messes

The built-in chamber camera isn’t just for time-lapses, its AI will detect spaghetti and workspace obstructions and alert you in Snapmaker Orca or the app, helping you avoid wasted time and material.

Specification	Snapmaker U1	Bambu Lab P2S	Creality K2
Printing Technology	Multi-Toolhead Core XY FDM	Core XY FDM
Build Volume (W×D×H)	270 × 270 × 270 mm	256 × 256 × 256 mm	260 × 260 × 260 mm
Max Speed & Acceleration	500 mm/s, 20,000 mm/s²	600 mm/s, 20,000 mm/s²
Max Flow Rate	32 mm³/s	40 mm³/s
Max Nozzle Temperature	300 °C
Max Heatbed Temperature	100 °C	110 °C	100 °C
Build Plate	Flexible Steel Sheet with PEI Surface	Textured PEI Flexible Steel Plate	PEI-Coated Spring Steel Plate
Default Nozzle / Hotend	Stainless Steel, 0.4 mm	Hardened Steel, 0.4 mm
Filament Diameter	1.75 mm
Compatible Filaments	PLA, PETG, ABS, ASA, TPU, PA, PC, PVA, PET-CF, PAHT-CF, PA6-GF
Camera	2 MP Built-in Chamber Camera	1080p HD (30 fps) Built-in Camera	720p @ 30 fps Chamber Camera
Touchscreen	3.5″ 320 × 480 Touchscreen	5″ 854 × 480 Touchscreen	4″ Touchscreen
Connectivity	Wi-Fi, USB Flash Drive
Storage	26 GB eMMC	8 GB eMMC
Product Dimensions	584 × 499 × 730 mm	392 × 406 × 478 mm	404 × 436 × 545 mm
Net Weight	18.2 kg	14.9 kg	18 kg