ANYCUBIC High Speed 2.0 Resin

Anycubic High Speed Resin 2.0 1KG – Fast-Curing UV Resin for LCD 3D Printing

Anycubic High Speed Resin 2.0 is a fast-curing 405nm UV resin specially formulated for high-speed LCD 3D printing. With 50% lower viscosity and reduced curing times of just 1.5-2.8 seconds per layer, this high speed 3D printer resin delivers up to 3X faster printing compared to standard resins.

Ideal for printing large cosplay props, prototypes, and structural parts where speed matters more than ultra-fine detail. The improved 2.0 formula offers 20% resilience improvement and reduced odor for a better printing experience.

Anycubic High Speed Resin 2.0 Key Features

• 3X Faster Printing – Reduced layer exposure times of 1.5-2.8 seconds
• 50% Lower Viscosity – Improved flow for faster settling and cleaner prints
• High Toughness – 16-20% elongation at break for durable parts
• Low Odor Formula – Improved 2.0 formulation with reduced smell
• Wide Compatibility – Works with all 405nm LCD/MSLA printers
• Good Surface Finish – Hardness of 83-85 Shore D

Anycubic High Speed Resin 2.0 Exposure Settings

Printer-Specific Exposure Times

Settings based on 0.05mm layer height at room temperature (24°C). Adjust based on your printer and environment.

Anycubic High Speed Resin 2.0 Material Properties

High Speed Resin Applications

• Cosplay Props – Large armor pieces, weapons, helmets where speed matters
• Rapid Prototypes – Quick iterations and concept models
• Structural Parts – Functional components that don’t require fine detail
• Display Models – Large figures and display pieces
• Batch Production – Multiple parts where print time is critical

Post-Processing Instructions

1. Wash – IPA (95%+) for 3-5 minutes; ultrasonic preferred.
2. Dry – Air dry completely (5-10 minutes).
3. Cure – UV cure 3-5 minutes; don’t over-cure.

Safety Precautions

Anycubic High Speed Resin 2.0 Specifications

Anycubic High Speed Resin FAQ

Q: Is High Speed Resin compatible with my printer?
A: Yes, High Speed Resin 2.0 works with any 405nm LCD/MSLA resin printer from Anycubic, Elegoo, Creality, Phrozen, and other brands.

Q: How much faster is High Speed Resin?
A: Up to 3X faster than standard resins. With the Photon Mono M5s in high-speed mode, you can achieve up to 105mm/hour print speed.

Q: Can I use High Speed Resin for detailed miniatures?
A: High Speed Resin is optimized for speed over ultra-fine detail. For highly detailed miniatures, consider using Standard or High Detail resin instead.

Q: What if my room is cold?
A: Below 20°C (68°F), increase exposure time by 30% and reduce Z-lift speed by 30%. Resin becomes more viscous in cold temperatures.

Q: How do I dispose of unused resin?
A: Never pour uncured resin down drains. Expose uncured resin to sunlight until fully cured, then dispose as solid waste according to local regulations.

Related Products

Looking for other resins? Explore our collections:

• All LCD Resins – Standard, ABS-Like, Water Washable
• Wash and Cure Machines – Essential for resin printing
• All Anycubic Products – Printers and accessories