CREALITY K1 HOTEND – All Metal Hotend V1 / Bi Metal V2 for K1 / K1 Max 3D Printers

Creality K1 Hotend – All Metal V1 / Bi Metal V2 for K1 / K1 Max

Original Creality ceramic hotend replacement for K1 series. Features 60W ceramic heating ring for rapid, uniform heat transfer. 30% larger hot melt section (28.5mm) enables 600mm/s high-speed printing. All-metal heat break withstands up to 300°C.

Key Features

• 60W Ceramic Heater – High thermal conductivity, uniform heating
• 30% Larger Melt Zone – 28.5mm hot melt section
• 600mm/s Speed Support – High-flow design
• 300°C Max Temperature – All-metal construction
• Titanium Alloy Heat Break – 0.25mm ultra-thin wall for thermal isolation
• Smooth Inner Wall – ≤Ra0.4 roughness for consistent feeding

Compatible Materials: PLA, ABS, PETG, TPU, PP, PC, nylon and more

Maintenance Tip: Keep the nozzle clean, avoid overheating residue buildup, and re-run calibration after any hotend/nozzle replacement.

Official Replacement Guide (Creality Wiki): Replace Integrated Hotend Kit (K1/K1C/K1 Max) | Replace Nozzle (K1/K1C/K1 Max)

Older K1 / K1 Max (Earlier Version): Replace Old Version Hotend Kit | Replace Old Version Nozzle

When to Replace

• Heating Failures – Cannot reach temperature
• Persistent Clogs – Blockages in nozzle
• Leaking – Filament oozing from joints
• Temperature Instability – Fluctuating readings
• Physical Damage – Bent or cracked components

Compatibility

Specifications

Related Products

• K1 / CR-M4 Nozzle Kit
• K1 Series Silicone Sock