The B1 SE Plus not only impresses with its 310 x 310 x 340 mm build space but also with the automatic levelling of the print bed, an all-metal extruder and many other smart features.
Special features at a glance:
Automatic levelling
Build space of 310 x 310 x 340 mm
All metal extruder
Powerful 32-bit chip
Ultra-quiet printing
Filament sensor
Resume printing function after a power failure
Modular design
HD touchscreen
Auto-levelling function
The automatic levelling of the print bed simplifies the printing process considerably, saves time and prevents printing errors.
Improved structure for more stable printing
The modular design makes the assembly of the BIQU B1 SE Plus easy and convenient. The structure design has been refined to increase stability and take printing accuracy to a new level.
Powerful motherboard with more expansion options
The BIQU B1 SE Plus is equipped with a powerful 32-bit ARM Cortex M4 mainboard, which gives the 3D printer better performance and faster processing speed.
Expansion interfaces
Raspberry Pi
WLAN module
Dual Z-axis
BLTouch
RGB light
Automatic shutdown
Quiet driver and efficient cooling
A TMC silent driver ensures stable operation and faster heat dissipation. The dual fan system cools the print and the nozzle efficiently and silently.
All metal extruder and premium brass nozzle
An all-metal extruder with a premium brass nozzle with a Ra0.4 inner surface ensures smooth filament loading and clean retraction.
Resume printing function after a power failure
A power failure is no problem for the BIQU B1 SE Plus. The printing process can simply be continued from where it was interrupted.
Filament sensor
Printing stops automatically when the filament runs out and can be resumed after new filament has been added.
3.5 inch HD touchscreen
The 3.5-inch HD touchscreen with responsive touch controls and a user-friendly interface ensures smooth operation and supports simple language changes. It is also very easy to choose between the open-source firmware Marlin and BIGTREETECH.
Carborundum build surface and improved heating bed
The aluminium-based heating bed increases the thickness of 1 mm, which is means high hardness and better flatness and can be heated to 100 ° C in 5 minutes.
The carborundum glass plate ensures excellent print bed adhesion and easy detachment of the model after printing.
leonardwkc –
Excellent ? It works well.