Welcome Guest [ Login / Register ]

Operation continues as usual during MCO. Contact us at +6010-3443128 to arrange for same-day delivery within Klang Valley.
Operation continues as usual during MCO. Contact us at +6010-3443128 to arrange for same-day delivery within Klang Valley.
-RM 9.00

Smith3D PLA PRO / PLA+ Filament 1KG 1.75mm – Black White Orange Red Yellow Purple Green Blue Pink Smith PLA

> SKU: 3151344688
(799 customer reviews)

RM 56.00RM 75.00

Clear

Description

🔥 All are ready stock in Sungai besi office & ship within 24 hours* (Except for public holiday, but do call us to check)
🔥 Other (West Malaysia) for self pickup or grab/lalamove.

1. Easier print and smoother surface than normal PLA
2. Neat winding, less tangling issue
3. Stronger than normal PLA as it has toughening additives added into it
4. Less warping and sticks to bed better
4. Anti-Moisture Formulation. Longer Lasting

Smith3D’s filament choice is an ever changing selection, we have tested filaments from 20+ suppliers so far to find the best quality filament, at an affordable pricing. We won’t stop the process of finding a better supplier, so the choices will be updated constantly. This filament is our favourite to use so far in our own printing work, and we hope you like it too.

Samples printed above are all running on CHEP’s profile for Ender 3 – 0.2mm layer height at 215 degrees, without support. Printed with Ender 3 Pro and Ender 5 Plus

Reviews (799)

5.0
792
5
2
0
0

Add a review

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

  1. urchobby

    [Variation: Yellow]

  2. urchobby

    [Variation: Black]

  3. urchobby

    [Variation: Red]

  4. sflow_9177

    [Variation: Black]

  5. sflow_9177

    [Variation: White]

  6. hlmilk1987

    [Variation: CrealityHP-PLA White]

  7. aliff_azrul_zulkifli

    [Variation: Black]

  8. aliff_azrul_zulkifli

    [Variation: Traffic Red]

  9. aliff_azrul_zulkifli

    [Variation: Purple]

  10. aliff_azrul_zulkifli

    [Variation: Green]

  11. arryshy

    Very satisfied with the print quality [Variation: CrealityHP-PLA Black]

  12. shahirsou

    [Variation: Black]

  13. unbrutal

    Masa print pakai filamen ori, sampai habis tak ada masalah. Bila first time pakai yang ni, dia jadi meleding selepas beberapa layer. Setting yg sama je. Takkan sebab design kot kan. Apa pun kena try print lagi la…. [Variation: Blue]

  14. choicheekien

    [Variation: Black]

  15. choicheekien

    [Variation: White]

  16. brandon_khoo

    [Variation: Black]

  17. brandon_khoo

    [Variation: Gray]

  18. brandon_khoo

    [Variation: Traffic Red]

  19. derrickganjr

    [Variation: Black]

Menu