Ender-3 S1 Plus 3D Printer Semi DIY 300*300*300mm Touch Screen Auto Leveling Dual Z

The Larger Printing Size:

With the 300*300*300mm, larger printing size, this printer can meet more of your printing requirement. Your idea should not be confined. Achieve better print results and a larger print model at a time.

Dual-Gear Direct Drive Extruder:

Compatible with more filaments, Ender 3 S1 Plus 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.

CR Touch Auto Bed Leveling:

Upgraded CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the heatbed.

Higher Printing Precision & Easy to use:

Also like Ender 3 S1 and Ender3 S1 Pro, Ender 3 S1 Plus also has Z-axis dual-screw+Z-axis dual-motor design. This can make Ender 3S1 Plus works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improvingthe printing quality. You can also quickly install the printers with 6 steps. Power loss recovery Supported and filament sensor installed.

Build Volume: 300*300*300mm

Machine Dimension: 557*535*655mm

Printing Speed: maximum 100 mm/s

Printing Precision: 100mm±0.2mm

Layer Height: 0.1-0.4 mm

Filament Diameter: 1.75 mm

Nozzle Temperature: up to 260°C

Heat Bed Temperature: Up to 100°C

Extruder: “Sprite” Dual-gear Direct Extruder

Build Surface: Spring steel PC magnetic build plate

Extrusion Force: 80 N

Leveling Mode: Auto-leveling with CR-Touch

Display: 4.3-inch color touch screen

Motherboard: 32-bit silent motherboard

Nozzle Quantity: 1

Nozzle Diameter: 0.4 mm

Resume Printing: Yes

Filament Sensor: Yes

Rated Power: 350W/24V

Slicing Software: Creality Slicer/Cura/Repetier-Host/Simplify3D

Supported Filament: PLA/ABS/TPU/PETG

Supported Language: Chinese, English, Spanish, German, French, Portuguese, Italian,Russian and Turkish

3D File Format: STL/OBJ/AMF

Connectivity: Type-C USB/ SD card