When to Titanium Alloy Nozzle?
Titanium is an alternative to stainless steel nozzles and is chemical resistant which means they are better for glow in the dark filaments. It’s better than brass & much more suitable for carbon-added filament (e.g. carbon fibre).
Compared to Hardened Steel Nozzle, this is less wear resistance but you don’t have to increase the temperature as much as Hardened Steel Nozzle during printing.
Product Name: TC4 Titanium Alloy Nozzle
Material: Titanium Alloy
Titanium alloy nozzles are produced according to the E3D series nozzle size and are
produced from TC4 titanium alloy materials. The composition of TC4
titanium alloy material is Ti-6Al-4V, which belongs to (a+b) type titanium alloy, which has
good comprehensive mechanical and mechanical properties and high
specific strength. The strength of TC4 is sb=1, 012 MPa, density g=4.4×103, specific
strength sb/g=23.5, and the specific strength sb/g of alloy steel is less than
18. Titanium alloy has low thermal conductivity. The thermal conductivity of titanium alloy is
1/5 of steel, 1/13 of aluminum alloy, 1/25 of copper, and thermal
conductivity of TC4 l=7.955 W/m·K. The above data is for reference only.
1. High strength
2. Good corrosion resistance
3. High heat resistance
4. Wear resistance
5. Finer processing