BIGTREETECH Octopus V1.1 BTT Motherboard 3D Printer Parts TMC2209 Ender 3 V2 Pro Voron DIY Kits

🔥 All are ready stock in Sungai besi office & ship within 24 hours* (Except for non working day, but do call us to check)

🔥 Select Others (West Malaysia) as shipment if you’d like to opt for self-pickup/by delivery services (Lalamove, Grab, etc ). Contact us after placed order.etc )

New Arrival Octopus Pro V1.1! With Motor input voltage support up to 60V, which mean u can now use TMC5160 HV, MAX31865 chip for extra PT1000 thermistor and also MAX8 HV Drive.

Note: Octopus Pro V1.1 F446 has 512K Flash thus it would be cut down the features of RRF firmware. if not using RRF firmware, this is the perfect board for Marlin & Klipper.

🐙【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
🐙【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
🐙【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port.
🐙【BLTouch Auto Leveling Sensor】BLTouch is an auto leveling sensor for 3D Printers based on open-source.Simple, Smart, High-precision.It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
🐙【What You Can Receive】BIGTREETECH Octopus V1.1 Motherboard*1, Type C Cable*1, Rubber Duck*1, Exquisite Packaging Box*1.

For more details about BTT Octopus you can visit this website:
https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-V1.0

Features:
32-Bit ARM Cortex-M4 CPU with 180MHz
8 stepper driver slots
Up to 9 stepper motors can be connected
Rasperry PI Interface
WIFI Interface
Adjustable fan voltage (24V, 12V, 5V)
Auto Power Down capable (separate relay required)
Power Loss Recover Feature (separate UPS module required)
Connection option for WS2812 LED
Replaceable fuses
Supports BigTreeTech TFT displays as well as LCD12684, LCD 2004
Stallguard for sensorless homing
On-Board 32K EEPROM
High performance MOSFET
Dimensions: 160x100mm
Hole spacing: 150x90mm

Connections:
12V/24V Input
8 stepper driver slots (SPI, UART, STEP / DIR)
9 stepper motors can be connected (dual Z axis)
Rasperry PI Interface
CAN BUS, SPI und I2C
USB-C
WIFI interface for ESP8266 module
Connection option for WS2812 LED
4 connections for heating cartridges
5 temperature sensor connections
6 connections for PWM fans
2 connections for a permanent fan
1 connection for BL-Touch sensor
6 connections for limit switches
2 filament runout interfaces