ANYCUBIC Water Washable ABS Like Resin V3

ANYCUBIC Water Washable ABS Like Resin V3

🔥 In-stock KL (Sungai Besi)
🚀 Ship in 24hrs! Mon-Sat 10AM-6PM, Closed on Sunday.
🚚 Pick "Seller's Fleet" at checkout for self-collect or same-day delivery services via Lalamove, Grab. Buyer covers fee. Set Smith3D Sungai Besi Office Lot as pickup point.

🛡️7 Days 1 to 1 Defective Replacement Warranty

✨ Key Features
💪 High Resilience & Crack Resistance
• With a Shore hardness of ~86D and elongation at break between 22–27 %, this resin resists cracking. You can drill through prints without them shattering.

🎯 Precision & Low Shrinkage
• Maintains fine detail with shrinkage rates of ~3.9–4.9 %. Models stay accurate and consistent even for demanding prints.

💧 Lower Viscosity & Faster Curing
• Viscosity of ~280–300 mPa·s (at 25 °C) allows good flow and faster resin reflow, helping reduce print delays.

🌫 Low Odor & Water-Washable
• Cleaner printing environment—avoids heavy fumes. The water-washable nature makes post-processing easier without harsh solvents.

🔧 Wide Compatibility & Strong Mechanical Strength
• Designed for most LCD / DLP printers (365–405 nm).
• Flexural strength: ~50–60 MPa, tensile strength ~38–45 MPa.

🔍 Differences: ABS-Like Resin 3.0 vs Older ABS-Like / Water-Wash Versions
• Higher toughness & flexibility: Earlier ABS-like resins had lower elongation (~13 % in some older gen), making them more brittle. 3.0 nearly doubles that.

• Viscosity tweak: The 3.0 version has a more controlled, moderate viscosity for better flow and curing behavior vs earlier versions that might have been thicker or more variable.

• Reduced odor & better post-processing: Enhanced formulation helps cut down smell and improves the ease of water washing vs older ones that may have needed stronger cleaning methods.

• Mechanical property improvements: 3.0 brings stronger flexural / tensile strength values, making it more reliable for functional parts than prior generations used for decorative or prototype prints.

🛡️ WARRANTY NOTE
▪ 7 Days 1 to 1 Defective Replacement Warranty
▪ We will not make any warranties or accept any responsibility for any misuse by the user.
▪ For more details regarding provided warranty, visit
| https://www.smith3d.com/pages/faq/ |

📞 ZeroOneZero-344 3128
💬 Shopee Chat/Call/WhatsApp for enquiries.

🏬 | Office Lot |
SMITH3D SDN BHD
Medan Niaga Tasik Damai,
Sungai Besi, 57000 Kuala Lumpur