New Upgrade from TOTEM S!
【The Most Advanced Firmware】Totem laser master firmware, smarter, faster, higher precision and easier to use.
[Specialized Motherboard] LKS mainboard. Support baud rate as high as 115200, more powerful! Engraving speed could be as high as 3000MM/Min. (If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S)
【Perfectly compatible system】Use LaserGRBL or LightBurn (It’s the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS, and Linux.
【Compressed spot】 Ordinary laser spot is 0.16mm and compressed spot is 0.08mm. With the same power, the smaller the spot, the more concentrated the energy, which reduces the engraving time.
Very suitable for amateur laser engraving to use low-light positioning and free positioning functions. It has a large carving area of 30X30cm and a gantry-shaped design with no restriction on carving height
– Please read the Users Manual before use.
– Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!
– Do not engrave the mirror objects or metals with strong mirror reflectivity, which may cause injury to the operator or burn the laser.
1* TT-5.5S 40W Laser Engraving Machine DIY Kit
1 * Laser Goggles
1 * Adapter, USB Cable, Users Manual(English)