Welcome Guest [ Login / Register ]

Operation continues as usual during MCO. Contact us at 011-10800321 to arrange for same-day delivery within Klang Valley.
Operation continues as usual during MCO. Contact us at 011-10800321 to arrange for same-day delivery within Klang Valley.

Low Temp Nylon PA TPU Filament 1KG For 3D Printer CF Filament 1.75 mm 1 kg for Ender3 CR10 Anycubic Accuracy +/- 0.05 mm

$26.39

1 in stock

Compare

Description

(1) Why choose PA / TPU because you really need to print something practical useful. Flexible CoPA/TPU compounding and carbon fibre powder infill.

(2) The temperature resistance is 120 degrees, the hardness is 120 A, the temperature of the hot bed cannot be turned on and the constant temperature cover is not required and it can be easily printed on the remote device such as Ender3.

(3) No need to worry about warping, cracking, moisture absorption and drying. The impact resistance is much higher than PLA and PETG and it won’t break if it falls on the ground.

(4) Low temperature nylon, composite material, hardness 65-70D (120A), elongation 300%, tensile strength >40MPa, resistance temperature >100 degrees, retracting work. Suggested nozzle temperature 240 degrees.
(5)Flexible nylon/TPU compounding, low temperature nylon, composite material, hardness 60-65D (100A), elongation 300%, tensile strength >40MPa, resistance temperature >100 degrees, retraction function, low surface.

Reviews (0)

0.0
0
0
0
0
0

Be the first to review “Low Temp Nylon PA TPU Filament 1KG For 3D Printer CF Filament 1.75 mm 1 kg for Ender3 CR10 Anycubic Accuracy +/- 0.05 mm”

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

There are no reviews yet.

Select your currency
USD United States (US) dollar
Menu