🔥 All are ready stock in Sungai besi office & ship within 24 hours* (Except for non working day, but do call us to check)
🔥 Select Others (West Malaysia) as shipment if you’d like to opt for self-pickup/by delivery services (Lalamove, Grab, etc ). Contact us after placed order.etc ).
🔥 For KL same day delivery, Please contact us if you’d like to opt for self-pickup/by delivery services (Lalamove, Grab, etc ). Buyers will have to bear the delivery cost and set our Sungai Besi office as pick up point. Do check with us before you purchase as we may not be available.
NEW CR-10 SE Upgrade!
Solid Foudation for Print Quality
The first layer printed by CR-1O SE is neat, firm, and uniform.
lt is meant to take the print quality and success rate to a new level.
Hands-free Leveling to Get Ideal First Layer
CR-10 SE uses both a CR Touch and a strain sensor to do leveling and Z offset automatically the first time it is powered on.
It delivers an excellent first layer without you lifting a finger.
Linear Rails, Precise and Durable
The precise linear rails on the X and Y-axis have carriage slides containing ball bearings, making each move accurate, steady, and frictionless (0.04 friction coefficient*).
Built out of stiff steel, they will stay as new even after long-time use.
*Data from Creality Lab.
Effective Model Cooling Fan
A 12000rpm fan sends a strong wind via a U-shaped air duct to cool the freshly printed model section from three sides.
It improves the bridges and overhangs significantly and makes the details more vivid.
Optimal Quality with Advanced Algorithms
Input shaping: Mitigates the printer’s vibrations with a G-sensor for minimal ringing or ghosting.
Motion advance: Optimizes the feeding flow for fewer blobs and oozes.
Super Fast to Complete Print Tasks
Max Printing Speed: 600mm/s*; Max acceleration: 8000mm/s²*
CR-10 SE prints faster and better with Creality Hyper PLA Filament.
Reliable Direct Drive Extrusion
CR-10 SE features a “Sprite” direct drive extruder with two gears (1:3.5 gear ratio) that exerts a strong extrusion force of 65N*.
The feeding and retraction are exact and uniform, even when it comes to flexible filaments.
Hotend for Clog-free Feeding
60W ceramic heater encircling the hotend, getting the filament fully melted at a 32mm³/s flow*;
Bi-metal (copper+titanium alloy) heatbreak, great to prevent thermal creep;
Hardened steel nozzle
– 12 Months Manufacturer Warranty from Creality
– While we do check every printer for potential missing parts before we ship out. In any case if there is any manufacturer defects, inform us immediately within 7 days of receiving the printer.
– Warranty doesn’t cover wear & tear parts and cosmetic issue that has no relation to printing performance.
– Parts that has been modified or tampered with are not covered by the warranty.
– We welcome any question regarding the setup of printer, we will try our best to answer each of your question.