New

Bambu Lab H2C Combo

Price range: RM11,499.00 through RM16,699.00

Product Features

Hotend Change Multi-material Printing
Minimal Purge Waste Multi-Color Printing
Precise & Fast Inductive Nozzle Heating
Close-loop Servo Extruder
Full Filament Path AI Error Detection
350°C Nozzles & 65°C Active Heated Chamber
Optional 10W/40W Laser and Cutting Module
325*320*320 mm³ Build Volume

Variation

Package Add On

Clear

Order Info

Order will be shipped out from our KL warehouse in 1-3 business days once being processed.
If you need Lalamove once purchased, WhatsApp to our phone for quick arrange delivery.

Accepted Payment Methods - Visa, Mastercard, American Express, PayPal, FPX, Atome

SKU: BAMBULAB-H2C Categories: 3D Printers, FDM 3D Printers, Industrial Printer Tag: Bambu Lab

Bambu Lab H2C Overview

High-Temp, High-Strength, Multi-Material — Delivering Advanced Material Capability With Precise And Reliable Performance.

Revolutionary
“Vortek” Multi-Material System

50 μm
Motion Accuracy

65 °C
Active Heated Chamber

59 Sensors
4 Cameras

AI Checklist

AI Powered Precision

59 Sensors
4 Cameras

Precise Extrusion Control

Smoother Surfaces
Sharper Edges

Vortek Toolchanger
System

Minimal Purge Waste

Chamber Temperature

65 ℃ Active
Heated Chamber

Vortek Hotend Change System

The Vortek Hotend Change system enables the use of up to six interchangeable, contactless connected hotends. Tool changes take only seconds, with virtually no user involvement.
The printer automatically recognizes which hotend was previously used with a given filament and, before starting a print job, suggests reusing it. This means fewer errors, less material waste, and less time spent managing the printer.

Multi-Material Printing with Minimal Purge Waste

In traditional single-nozzle multi-material printing, purging is needed to clear leftover material between filament changes.
Vortek changes that with an intelligent hotend-swapping system that replaces the entire hotend, delivering faster, cleaner prints with minimal waste.

Always Delivering the Most Efficient Combination

The Vortek system can store filament information in the hotend’s memory, ensuring the correct filament is matched to each hotend.
If you are printing with more than seven filament types, the system can calculate the optimal combination to minimize purge waste.

Small Form Factor, More Filaments

Because only the hotend is swapped, the system can house up to six replaceable hotends without significantly reducing the build volume.
That means more materials, more colors, and more possibilities, all in one print.

8-Second Induction Heating

Industry-leading induction heating technology brings the nozzle to temperature in 8-sec, significantly reducing the preheating time for each material swap compared to traditional methods.

Contactless Design For Reliability

High standards for reliability led Bambu Lab to move away from contact-based metal pins, which are prone to oxidation and unstable connections.
Bambu Lab developed a contactless solution that ensures a stable, high-frequency connection, the foundation for precise temperature control and intelligent hotend sync.

Colors Are No Longer Limited By How Many Toolheads You Have

Unlike traditional toolchanger printers that limit color count by the number of toolheads, the H2C supports up to 24 materials in a single print through parallel-connected AMS units.
Its intelligent algorithm optimizes filament-to-hotend allocation to minimize purge waste while delivering outstanding multi-color and multi-material results.

Enclosed for High-Performance Printing

With its seamless enclosure and adaptive airflow system, the H2C maintains a stable chamber temperature for high-performance materials and filters the air to keep your workspace clean and safe.

Fully Automatic Nozzle Offset Calibration

Bambu Lab’s inductive nozzle offset calibration is fully automated, no manual steps, no calibration plates, no extra setup.
In just a few minutes, the H2C precisely calibrates nozzle offset to within 25 microns.

Dedicated Hotends for Specific Filaments

The H2C’s Vortek system lets you dedicate one of its six interchangeable hotends to specific filaments, a game-changer for valuable engineering materials.
This ensures superior consistency and reliability across prints. Each hotend can even automatically store filament information, so the next time you load that material, it’s instantly matched to the correct hotend.

Better High-Speed Reliability & Real-Time Error Detection.

The PMSM servo extruder delivers up to 10 kg of maximum extrusion force, 70% more than stepper motor, dramatically improves high-flowrate extrusion stability.
Bambu Lab’s proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time.

50µm Ultra-Fine Motion Accuracy

With its Vision Encoder (Purchased Separately), the H2C achieves a distance-independent motion accuracy of less than 50 μm, thinner than human hair.
The system automatically compensates for any mechanical drift during calibration, ensuring consistent precision and peak performance over time.

Smooth Surface, Sharp Edges

The H2C leverages both the servo motor on the extruder and the high-resolution eddy current sensors on the nozzle to sense extrusion dynamics.
This enables precise extrusion control and automatic calibration of Pressure Advance (PA) parameters for each filament, resulting in smoother surfaces and cleaner, sharper edges.

Unleash The Full Potential of High-Performance Materials

All seven nozzles in the system can reach a maximum temperature of 350 °C, allowing you to print with our entire filament lineup using any nozzle you choose.
Improved layer bonding when printing demanding materials like PPA-CF, PPS, and PPS-CF at higher temperatures, leading to stronger and more reliable parts.

65 °C Active Heated Chamber

The H2C’s 65 °C actively heated chamber minimizes warping and deformation while enhancing layer adhesion for high-performance, high-temperature filaments.

Fire-Retardant Construction

The H2C’s chamber is constructed entirely with flame-retardant material, providing robust, passive fire safety protection across the entire enclosure.

59 Sensors + 4 Cameras

Each Potential Risk Has Its Own Detector.

AI-Powered Simplicity

The H2C is equipped with an array of 59 sensors* and a quad-camera computer vision system, all orchestrated by our proprietary neural algorithm. During printing, this system delivers intelligent, real-time diagnostics that can detect even the most subtle print anomalies as they happen. You don’t have to be an expert to solve problems—your printer does the job for you.

Vision
System

Full Inspection

Nozzle Camera

Temperature Control

Health Management System 2.0

The HMS system uses sensors and cameras to pinpoint printing issues with advanced logic, similar to car diagnostics codes. It provides clear, detailed troubleshooting guidance, allowing you to quickly resolve problems and get back to your creative work.

Best-In-Class Air Filtration

The H2C’s three-stage filtration system is essential for printing with engineering filaments.
This powerful combination of a G3 pre-filter, an H12 HEPA filter, and a coconut shell activated carbon filter effectively minimizes the odors and harmful particulates often released by engineering materials.

Flexible Network Security & Connectivity

The H2C offers convenient cloud connectivity for remote control from any device, full offline functionality for security-sensitive applications, ensuring complete physical isolation.
For advanced users, Developer Mode enables MQTT port access for integrating third-party components and software.

Bambu Lab H2D Pro

Unboxing Video Highlights

This short video guides you through a quick unboxing experience.

*Compliant with the requirements of GB/T 70.1-2008 standard [Equivalent standards: ISO 4762, ASME/ANSI B 18.3.1M – 1986 (R1993), DIN EN ISO 12474]

Detailed Features and Specification

	H2C	H2D	X1 E	X1 Carbon (X1C)
Build Volume (W×D×H)	325×320×325 mm³		256×256×256 mm³
Nozzle (included)	0.4 mm Hardened Steel
Max Nozzle Temp	350 ℃		320 ℃	300 ℃
Max Bed Temp	120 ℃		110 ℃ @220V / 120 ℃ @110V
Active Chamber Heating	Up to ~65 ℃		Up to ~60 ℃	Temperature control (no active to 60–65 ℃)
Max Toolhead Speed	1000 mm/s		500 mm/s
Max Acceleration	20,000 mm/s²
Supported Filament	PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS; CF/GF Composites		PLA, PETG, TPU, PVA, ABS, ASA, PC, PA, PET; CF/GF Composites
Chamber Camera	1080p
Body / Frame	Steel/Aluminum, Glass panels
Filament Diameter	1.75 mm
Physical Dimensions	492×514×626 mm³ 32.5 kg	492×514×626 mm³ 31 kg	389×389×457 mm³ 16 kg	389×389×457 mm³ 14.13 kg
Max Power Draw	1800 W @220V	2200 W @220V 1320 W @110V	1400 W @220V 750 W @110V	1000 W @220V 350 W @110V
Network & Security	Ethernet & Wi-Fi, App/PC control, Secure connectivity	Wi-Fi (802.11 a/b/g/n), App/PC control	Ethernet & Wi-Fi, App/PC control, Secure connectivity	Wi-Fi connectivity

Package Includes

H2C AMS Combo

Bambu Lab H2C

Textured PEI Plate

Spool Holder

4x 0.4mm Induction Hotend

0.2mm Induction Hotend

0.6mm Induction Hotend

2x 0.4mm Hardened Steel Hotend

4-in-1 PTFE Adapter II

Accessory Box

AMS 2 Pro

H2C Laser Combo

Bambu Lab H2C Laser Edition

Textured PEI Plate

Spool Holder

4x 0.4mm Induction Hotend

0.2mm Induction Hotend

0.6mm Induction Hotend

2x 0.4mm Hardened Steel Hotend

4-in-1 PTFE Adapter II

Accessory Box

AMS 2 Pro

10W / 40W Laser Module

Cutting Module

Laser Platform

Cutting Platform

Emergency Stop Button

Weight	42.00 kg
Dimensions	52.00 × 50.00 × 63.00 cm
Variation	H2C Combo, H2C 10W Laser Combo, H2C 40W Laser Combo
Package Add On	Combo Only, + 4KG PLA+ Bundle