Smith3D ESD ABS/ PETG 1.75mm 1KG 3D Printer Filament for Elegoo Ender 3 Prusa BambuLab Creality

All are ready stock in Sungai Besi office & ship within 24 hours* (Except for non working day, but do call us to check) Select Others (West Malaysia) as shipment if you’d like to opt for self-pickup/by delivery services (Lalamove, Grab, etc ). Contact us after placed order.etc ).
For KL same day delivery, Please contact us if you’d like to opt for self-pickup/by delivery services (Lalamove, Grab, etc ). Buyers will have to bear the delivery

ESD-PETG:Advanced ESD-Safe compound using multi-wall carbon nanotube tech for ESD protection. Target resistance: 10^7 to 10^9 Ohm.
Printing Parameters:Extruder: 230-260°C
Bed: 60-90°C
No heated chamber needed

Filament Specs: Diameter 1.75mm & 2.85mm +/- 0.05mm
Benefits:Chemical resistance superior to ABS
Low moisture absorption (3x less than ABS)
Minimal odor during printing
Low shrinkage, higher ductility

Chemical Resistance: Effective against acids, bases, salts, some oils; sensitive to specific hydrocarbons.
Applications: HDD Components, Wafer Handling, Jigs, and more.

——————————————————————————————————————————————————————

ESD ABS:High-quality ESD-Safe compound using multi-wall carbon nanotube tech for ESD protection. Comparable to Stratasys® ABS-ESD7. Target resistance: 10^7 to 10^9 Ohm.
Printing Parameters:Extruder: 220-240°C
Bed: 100-110°C
Heated chamber recommended

Filament Specs: Diameter 1.75mm & 2.85mm +/- 0.05mm
Benefits:Sturdy and durable
Easier to print than most industrial materials
Higher melting point than PETG

Applications: HDD Components, Wafer Handling, Jigs, and more.

——————————————————————————————————————————————————————-

Differences:
Chemical Properties: ESD PETG superior in chemical resistance, moisture retention, and odor during printing.
Printing: ESD PETG requires higher extruder temps (230-260°C) and cooler bed (60-90°C). ABS benefits from heated chambers.
Applications: Both materials serve similar sectors, but individual properties make them suitable for specific tasks.
Selection between them depends on the project needs, material properties, and available printing setup.