Smith3D ESD ABS/ PETG 1.75mm 1KG 3D Printer Filament for Elegoo Ender 3 Prusa BambuLab Creality

RM87.00RM118.00

Compare
SKU: FF-ESD-FILAMENT Categories: , ,

ESD-PETG:Advanced ESD-Safe compound using multi-wall carbon nanotube tech for ESD protection. Target resistance: 10^7 to 10^9 Ohm.
Printing Parameters:Extruder: 230-260°C
Bed: 60-90°C
No heated chamber needed

Filament Specs: Diameter 1.75mm & 2.85mm +/- 0.05mm
Benefits:Chemical resistance superior to ABS
Low moisture absorption (3x less than ABS)
Minimal odor during printing
Low shrinkage, higher ductility

Chemical Resistance: Effective against acids, bases, salts, some oils; sensitive to specific hydrocarbons.
Applications: HDD Components, Wafer Handling, Jigs, and more.

Smith3d esd abs/ petg 1.75mm 1kg 3d printer filament for elegoo ender 3 prusa bambulab creality

——————————————————————————————————————————————————————

ESD ABS:High-quality ESD-Safe compound using multi-wall carbon nanotube tech for ESD protection. Comparable to Stratasys® ABS-ESD7. Target resistance: 10^7 to 10^9 Ohm.
Printing Parameters:Extruder: 220-240°C
Bed: 100-110°C
Heated chamber recommended

Filament Specs: Diameter 1.75mm & 2.85mm +/- 0.05mm
Benefits:Sturdy and durable
Easier to print than most industrial materials
Higher melting point than PETG

Applications: HDD Components, Wafer Handling, Jigs, and more.

Smith3d esd abs/ petg 1.75mm 1kg 3d printer filament for elegoo ender 3 prusa bambulab creality

——————————————————————————————————————————————————————-

Differences:
Chemical Properties: ESD PETG superior in chemical resistance, moisture retention, and odor during printing.
Printing: ESD PETG requires higher extruder temps (230-260°C) and cooler bed (60-90°C). ABS benefits from heated chambers.
Applications: Both materials serve similar sectors, but individual properties make them suitable for specific tasks.
Selection between them depends on the project needs, material properties, and available printing setup.

Weight1.30 kg
Dimensions25.00 × 25.00 × 10.00 cm
Variation

ESD PETG, ESD ABS

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

64f59d49d53a0 1693818186.jpg
Smith3D ESD ABS/ PETG 1.75mm 1KG 3D Printer Filament for Elegoo Ender 3 Prusa BambuLab Creality
RM87.00RM118.00 Select options
Want a cookie?🍪 You can consent to have a better browsing experience.