[New Arrival] Flexible 70A Dental Resin UV Resin 405nm for Photon Mono X LCD 3D Printer

Resina Flexible Resin is here to provide flexible like feeling for Resin Printing!

Flexible70A Resin is the most stiff soft-touch material in our library of Flexible and Elastic Resins, with an 70A Shore durometer to simulate the flexibility of rubber or TPU. Balancing softness with strength, Flexible 70A Resin can withstand bending, flexing, and compression, even through repeated cycles.

Why Dental Resin:
– Lowest Toxic among all kind of Resins
– Compliance to MSDS

Print with Mono LCD:
Base Exposure: 80~90s
Normal Exposure: 6~7s

Print with RGB LCD:
Base Exposure: 120~160s
Normal Exposure: 15~18s

Specification:
Model: RSN528
Withstand temperature: 60~80°C
Shore Harness: 90D
Layer Height: 0.03~0.5mm
Shrinkage of Volume: 3.72~4.24%
Cure by UV Wavelength: 355~405nm
Viscosity: 700~800.s @25°C
Compressive Strength: 10-30MPa
Compatible with ALL LCD based 3D Printer:
Creality LD & Halot Series, Anycubic Photon Series, Elegoo Mars Series, Phrozen, Sparkmaker, Wanhao Duplicator D7 etc.

How to use
– Please shake well before use
– Recommended temperature 20C – 25C
– Keep your room well-ventilated while printing
– Always wear nitrile gloves to avoid direct skin contact. Do wash it immediately when contacted with resin

How to Storage
– Keep away from children
– Keep resins sealed tightly in the bottles
– Out of direct sunlight or UV and within 15°C – 35°C
– Do not expose resins to heat, flames, sparks or any source of ignition

Tutorial How to Improve Print Quality on Resin Printer:
https://smith3d.com/7-tips-to-improve-your-resin-sla-3d-print-quality-reduce-print-fails/

What’s included:
Resina Flexible Resin x1