[New Arrival] Glow in the Dark 3D 405nm Resin -1KG Elegoo Saturn Creality Anycubic Mono X Photon M3 Phrozen Mega

Introducing the Smith3D Glow in the Dark Photopolymer 3D Printer Resin – the latest series of resin with fascinating features. This resin is perfect for creating toys or room decorations as it glows in the dark! You can recharge this 3D printer resin with any light source such as UV light, smartphone torch light, LED light, and more. The duration of the glow depends on the intensity of the light source and the duration of charging.

Suggested Exposure Time (Based on 405nm UV)

LCD/MSLA:

100 Micron: 8 sec to 10 sec

50 Micron: 6 sec to 7 sec

Bottom: 70 sec to 100 sec

DLP/MSLA:

100 Micron: 5 sec to 7 sec

50 Micron: 2 sec to 4 sec

Bottom: 10 sec to 15 sec

Note that exposure times may vary and should be adjusted according to printer light energy, layer height, and model structure.

The suggested exposure time for this resin is based on 405nm UV and may vary based on printer light energy, layer height, and model structure. This resin is compatible with most LCD/DLP/MSLA printers with 405nm, including FlashForge, Wanhao, Anycubic, Creality, Phrozen, Elegoo, and more.

Technical Data Specifications

Density (g/cm3): 1.05- 1.25

Viscosity (MPa·s): 500-800

Hardness(Shore D): 80-88 D

Tensile strength (MPa)：3.41 +/-10%

Elongation at break (%): 10.65 +/-10%

Flexural strength (MPa): 33.59 +/-10%

Flexural modulus (MPa): 943.52 +/-10%

IZOD Impact Strength (j/m): 89.44 +/-10%

Package Includes:

1 x Smith3D Glow in the Dark 3D Printer Resin

Instructions for Cleaning, Post Curing, and Storage:

Cleaning & Post Curing:

-Fill two containers with IPA (>95%). Place the object in the first container and gently shake it or brush it with a soft brush. Soak it in the second container for about 1 minute.

-Dry the object with cold air, making sure it is fully dry.

-Place the object in the UV Curing Chamber to cure. The curing time will depend on the volume of the work piece and the optical power of the curing chamber.

Storage:

-Shake well before use and leave it for 30 minutes to eliminate air bubbles generated from the shaking process.

-Pack in an opaque UV safe bottle for ease of handling and safe storing.

-Recommended storage temperature is between 2-27°C.

-After use, filter the solution and keep it back into the opaque UV bottle on time, then place it in a dry and well-ventilated place.

Store in a cool and dry place, avoiding sunlight. The recommended temperature is between 25-30°C.