[New Arrival] 8K+ High Detail Model Resin Low Odor Formulation Resin Elegoo Creality Phrozen Anycubic 10K Resolution

<p>🔥 All are ready stock in Sungai besi office &amp; ship within 24 hours* (Except for non working day, but do call us to check)</p>
<p>🔥 Select Others (West Malaysia) as shipment if you’d like to opt for self-pickup/by delivery services (Lalamove, Grab, etc ). Contact us after placed order.etc )</p>
<p>[New Upgrade!] 10K Resolution Resin just released! Upgraded from 8K Resolution</p>
<p>10K High-Detail Model Resin Low Odor Formulation Series – 1KG</p>
<p>Features</p>
<p>- 10K (Upgrade from 8K) Ultra High Details Formulation</p>
<p>- Low Odor Formulation</p>
<p>- High hardness</p>
<p>- Non VOC</p>
<p>Weight: 1 KG</p>
<p>Shore Hardness: 85-88 D</p>
<p>Product Advantages :</p>
<p>Short curing time</p>
<p>Fine surface,</p>
<p>Finest detail features.</p>
<p>After curing, the printed piece has high hardness and toughness</p>
<p>Product Technical Parameters before Curing:</p>
<p>Viscosity: 300~500mPa•s (NDJ-8S rotary rheometer（25℃))</p>
<p>Density: 1.05~1.25g/cm3 (densitometer(25℃))</p>
<p>Molding Test Requirements and Technical Parameters after Molding</p>
<p>Molding Test Environment and Standard:</p>
<p>Temperature: 23±2℃</p>
<p>Relative humidity: 50%RH±5%RH</p>
<p>The standard of the test piece: ASTM</p>
<p>Post curing condition: The test piece was placed in water under 405nm ultraviolet radiation of 200mw/cm² for one minute.</p>
<p>Technical Parameters after Molding:</p>
<p>Maximum force(KGF): 168.7±10%</p>
<p>Tensile strength(MPa): 45.62±10%</p>
<p>Deformation of maximum point of force(mm): 5.75±10%</p>
<p>Elongation at yield point(%): 6.34±10%</p>
<p>Elongation at break(%): 11.5±10%</p>
<p>Maximum bending strength(MPa): 58.3±10%</p>
<p>Flexural modulus(MPa): 1123.2±10%</p>
<p>Hardness(Shore D)：80-85</p>
<p>Impact strength(j/m): 76±10%</p>
<p>Tensile modulus：608.5±10%</p>
<p>Post-Processing (Without Wash &amp; Cure Machine):</p>
<p>-Fill two containers with Isopropyl Alcohol (&gt; 95%). Shake or brush the object gently in the first, then immerse it in the second for a minute.</p>
<p>-Air-dry the object with cool air until completely dry.</p>
<p>-Cure the object in a UV Curing Chamber. The duration depends on the object’s size and the chamber’s power.</p>
<p>Storage:</p>
<p>Shake the JamgHe Resin before use, rest for 30 minutes to dissipate bubbles.</p>
<p>It comes in a UV-safe opaque bottle for convenience.</p>
<p>After use, filter it, store it back in its UV-safe bottle, and keep it in a dry, well-ventilated place.</p>
<p>Ideal storage temperature is between 25-30 degrees Celsius, avoiding sunlight.</p>
<p><img title="[new arrival] 8k+ high detail model resin low odor formulation resin elegoo creality phrozen anycubic 10k resolution" src="https://cf.shopee.com.my/file/my-11134208-7qul2-lhx7u23t5xbhe1" alt="[new arrival] 8k+ high detail model resin low odor formulation resin elegoo creality phrozen anycubic 10k resolution" width="1080" height="1080" data-uploading="uploaded" data-upload-status="success" /></p>
<p>—- Our Showroom——-</p>
<p>Smith3D Malaysia.</p>
<p>No.12 Ground Floor, Medan Niaga Tasik Damai, Sungai Besi, 57000 Kuala Lumpur .</p>
<p>+6010-344 3128</p>
<p>Operation Hour:</p>
<p>Monday to Saturday – 10.00am to 6.00pm</p>
<p>Sunday- CLOSED</p>
<p>For any further inquiries or support, please contact us via Shopee Chat or call/whatsapp us +6010-344 3128</p>