[New Optimized] Engineering Resin High Temp Series 1KG 1000g High Toughness 150C

RM49.00RM179.00

Compare
SKU: 9674534211 Categories: , Tag:

If you need a resin with advanced functionality, resistance to stress & stability over time, here’s it the High Temp Series!

Print with Mono LCD:
Base Exposure: 60~80s
Normal Exposure: 3~5s

Print with RGB LCD:
Base Exposure: 80~120s
Normal Exposure: 8~12s

NOTE: The exposure time should be adjusted according to printer light energy, layer height and model structure.

Specification:
Mode: SM3D815
Withstand temperature: 120~150°C
Shore Harness: 85-09D
Layer Height: 0.03~0.5mm
Shrinkage of Volume: 3.72~4.24%
Cure by UV Wavelength: 355~405nm
Viscosity: 350~550mPA.s @25°C
Compressive Strength: 80-90MPa
Compatible with ALL LCD based 3D Printer:
Creality LD & Halot Series, Anycubic Photon Series, Elegoo Mars Series, Phrozen, Sparkmaker, Wanhao Duplicator D7 etc.

How to use
– Please shake well before use
– Recommended temperature 20C – 25C
– Keep your room well-ventilated while printing
– Always wear nitrile gloves to avoid direct skin contact. Do wash it immediately when contacted with resin

Weight1 kg
Dimensions25 × 25 × 10 cm
Color

Black (1KG), Gray (1KG), Clear (1KG), Blue Grey (1KG), Black (500g), Black 200g Sample, White (1KG)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

[new optimized] engineering resin high temp series 1kg 1000g high toughness 150c
[New Optimized] Engineering Resin High Temp Series 1KG 1000g High Toughness 150C
RM49.00RM179.00 Select options
Want a cookie?🍪 You can consent to have a better browsing experience.